The gas fire model Flueboost 800 handles flue gases at up to 300c. This will vary dependant on length and width of flue. Being suitable for fireplaces with a maximum constructional opening of 1m2. For the most efficiency the ideal velocity of flue gas should be 2.5 – 4 m/s. It is recommended that you contact us pre purchase so we can confirm the most suitable duct diameter.
Supplied with a six core coded lead. 1 = N/O; 2 = N/C; 3 = Common; 4 = Live to Motor; 5 = Earth Neutral green and yellow.
Owing to its capacity to be fitted into any space installation and maintenance is easy.
Motor of variable speed
Centrifugal rotor and secondary cooling impeller
Class F windings
Sealed and lubricated ball bearings
Guaranteed reliable operation
In accordance with the Gas appliance safety directive 2009 – the unit comes pre fitted with an approved fail safe switch. This shuts the gas supply down should a flue blockage or fan failure happen.
For quality and durability our units are constructed from grade 304 stainless steel finished in mill.
Always contact us pre installation if this unit is being installed with a sealed appliance.
220/240 volt; Single phase;
Starting current 1.5 amp.
Running current 0.7 amp.
Varies with speed of fan. Details on request.